|
Punching Tool
Used for punching holes in soft brass, copper, and other
soft metals as well as leather, canvas, and gasketing
materials. A set for 6 to 38 mm is available as standard,
sizes 40 to 55 mm are available on request and made to
order
|
|
Valve Seat Cutter
These valve seat cutting tools are easier than ordinary
type. Cutters in assembly and handling for precision cutting
work. Remove the valve cap or flange and fit the suitable
cutter to the spindle. Then, set the fixing bed using
a tightening bolt for the cap or flange. Check that the
cutter fits horizontally with the valve seat and is in
the center position. At this point you set the adjustable
screw to find the best position of the cutter. After adjustment,
begin the cutting operation by turning the handle clockwise.
In case of slant surface cutting, please refer to the
following drawing. A standard set contains 1", 2", 3",
and 4" cutters, but other sized cutters, 1/2", 3/4", 1-1/4",
1-1/2", 2-1/2", 5", and 6" are also available upon request.
|
| [Back] |
|
